I ended up having to cut the info about where I bought this setup so I’ll put it here below. I have no affiliation with the company other than this is where I bought my setup. They have access to a lot of different brands and really know their stuff!
Help support this channel via Patreon:
www.patreon.com/BoatworksToday
* Materials and Supplies: www.amazon.com/shop/boatworkstoday
** Download our fiberglass Resin Guide: https://bit.ly/2PCr72e
*** Subscribe To This Channel!!
https://www.youtube.com/user/boatworkstoday?sub_confirmation=1
There is additional content and ad-free versions of these video’s available for Patreon supporters! Please click below to find out more!!
www.patreon.com/BoatworksToday
Thanks for watching!
#BoatworksToday #Bertram #Restoration
AutoBodyStore.com
Len Stuart (Owner)
609-859-3670
Regardless of the type of spray system you’re looking for they can make sure you’re taken care of 🙂
If you have any questions or want to know more about something that was not addressed in the video please do not hesitate to let me know!
Please ‘Like’ or ‘Share’ above and join the discussion below in our comments section!!
Also, please remember that there are extended ad-free versions of these video’s available for Patreon supporters! Please click below to find out more.
Huge fan of your videos!! I have a quick question. I’m spray painting my 20’ c/c, I already apply awlgrip 545 epoxy primer with 10% reducer (2coats) with approximately 40psi. The results were great for being my first time. The surface needs some sanding before I apply Awlgrip TOPCOAT with 10% reducer at approximately 45-50psi. What sand paper grid do you recommend to prep the prime surface before applying the paint?
Thank you so much in advance.
Hey Andy; a quick question for you; if you had to replace your spray gun and pressure pot today, especially for spraying awlgrip and or alexseal(s?) what setup would you choose. I’m done with the $50 latex jobs from the box store. ( I’m tired of sanding off the ‘misstooks’.